FAN8100MTC Datasheet | Fairchild Semiconductor

Features - Two channel H-bridge drivers with built-in NPN and vertical-PNP power transistors - Four functions for each channel - Forward/Reserve/Stop/ Brake functions - Special output pin for an RC car application - for a Turbo function for Ch.A (five-function RF receiver chip RX-2 interface) - Low stand-by current (typ. 0.1u A) - Wide supply voltage range (PVCC=1.8V ~ 9.0V) suitable for battery operated applications - 3.3V and 5V micro-controller interface - Low output saturation voltage (upper and lower total : typ. 0.15V@ 0.2A) - High current outputs (max. 1.5A/Ch.) - Parallel connection (Max Current : 3A) - High thermal capability for high continuous output currents - Built-in spark killing diodes - Built-in a thermal shutdown(TSD) function with hysteresis - Short circuit protected - Temperature independent internal voltage reference Description The FAN8100N/FAN8100MTC is a monolithic two channel dc motor drive IC designed for low voltage operated systems. It has dual H-bridge drivers, using NPN and vertical PNP power transistors with a low saturation voltage. Power packages with heat sinks endure high continuous output current. The high current and low saturation voltage feature make this device suitable for dc motor applications such as toy cars. It has also a built-in thermal shutdown protection circuit with hysteresis. 12-DIPH-300 14-TSSOP 1 1 Typical Application - - - - - General purpose dc motor driver Electronic toys - robots, RC cars Digital still camera(DSC) and film camera Home appliances and office equipment Precision instruments Ordering Information Device FAN8100N FAN8100MTC FAN8100MTCX Package 12-DIPH-300 14-TSSOP 14-TSSOP Operating Temp. - 20 ~ +75°C - 20 ~ +75°C - 20 ~ +75°C Rev. 1.0.0 ©2005 Fairchild Semiconductor Corporation FAN8100N/FAN8100MTC .. Pin Assignments FORWARDA FORWARDB...